|
Delivered this incredible vehicle to a client and fellow forum member who flew in from New Zealand over the weekend.
This was his dream build overland and touring vehicle.
This is an overview of what all we did.
- 2024 Toyota Hilux 2.8 GD-6 automatic 4x4 XC legend
- Averey Denison wrap in Toyota Khaki
- Power Brake upgrade
- Tough Dog suspension upgrade with additional air helpers in the rear
- Alucab Khaya camper Basic
- Alucab roof box with Max Trax bracket
- 80L water
- additional 80L long range tank
- fitted Stonehill seat covers, transmission cover and dash cover
- Wildog front bumper
The interior of the Khaya was custom designed and fabricated by us according to the clients needs, includes:
- Combination of storage cubbies with canvas bags and drawers
- Countertop is Tidewater Cypress
- Pull out desk is a Kiaat board that is removable as a cutting board
- Seating bench can be reconfigured to create an extra sleeping platform
- Engel 80L upright fridge
- In the passenger gullwing side (kitchen area) we designed and installed a modular shelf system that can be adjusted in height and each shelf's depth can be adjusted
- Designed and fitted a drop-down table
- Installed a 220V power point from the inverter for easy use of the Induction stove
- Fabricated and fitted Molle plates in all the driver side gullwings
The battery system also designed and installed by us according to the BS7671 standard
- 24V - 230Ah Adventure-X lithium battery in a slimline enclosure
- Victron Cerbo GX system
- Mopeka bluetooth Sonar water tank level sensors connected to the Cerbo system
- Victron MPPT 150-35
- Victron Orion 12-24 18A DC Charger
- Victron 24-12 DC converter to give us additional option of 12V outputs for components we couldn't get rated to 24V
- Victron Multiplus II 24-3000 inverter and charger
- 600W of solar mounted to the roof
- Installed a combination of USB QC4.0 and USB-C points
- National Luna dual white and red LEDs fitted throughout the Khaya
The extra cab area of the Hilux:
- Installed a Hexa board floor to get a level platform
- Fitted and additional 40L fridge
- Fitted a shelving system behind the driver seat to house soft pack items and Wilddog4x4 12T recovery kit
- Fitted an ARB Twin compressor
Last edited by Jay_B; 2025/02/03 at 08:08 AM.
That is a good looking build, well done.
Could get SWAMBO on board with a build like that...
Could something like that be done in the Canopy Camper? (pipedream)
2015 VW Amarok 4motion Auto
2011 Conqueror Companion
I love seeing projects like this. Hope it leads to stacks of fun adventures
Aristotle wrote; ''Excellence is never an accident. It is always the result of high intention, sincere effort, and intelligent execution. It represents the wise choice of many alternatives. Choice, not chance, determines your destiny''
Excellent!
Johan Maree
Isuzu 3.0 DC V-Cross 4x4
MB Gwagen G350 Bluetec
Nissan NP300 2.4 4x4
Conqueror UEV-25
Satphone - Rental supplier
Yes can be fitted to the canopy camper - slight change is the space over the wheel arch that you loose but you gain a lot more width with the canopy camper compared to the Khaya.
We are currently busy finishing off a canopy camper design for someone, although a lot more basic setup than this.
I am personally not one for videos but a friend asked to do a walkaround video of the Hilux build we did.
Gives some different perspective on the details that photo maybe don't get across.
Last edited by Jay_B; 2025/04/09 at 09:33 AM.
Really impressed with your build on Get Out and Go's camper.
https://youtu.be/Dw48FtQS6jE?si=OIfMKuCbOeOIF4P8
Looks fantastic, well done.
4x4 less.
Bookmarks