Suspension KB6 Upper Control Arms Ball Joint Spacer





Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2011
    Location
    Windhoek
    Age
    36
    Posts
    428
    Thanked: 49

    Default KB6 Upper Control Arms Ball Joint Spacer

    Has anyone here fiddled with the upper control arm ball joints on their KB6?

    Looking at what the Colt guys do: https://www.4x4community.co.za/forum...all-joint-flip

    It would make sense to do something similar after doing a lift.

    I've got 20mm spacers on the front springs of mine which gave about a 40mm lift.

    Now due to the nature of the front suspension geometry the lower arms had to be moved inwards a bit after the lift to correct the camber (upper control arms are not adjustable).

    Furthermore when the front wheels droop they start to lean inwards quite a bit (negative camber?).

    My thinking is to put a spacer between where the the ball joint mounts on the upper control arm which effectively puts the control arm back to its original position. Ultimately this should bring the track to its normal width.

    Anyone care to share their thoughts?
    Off-road: '14 Isuzu KB300 4x4
    On-road: '08 Audi A5 3.2 Quattro
    Toy: '98 Defender 90 TD5
    SOLD: '07 Audi A4 2.0 TDI
    SOLD: '02 Mitsu Colt V6 4x4
    SOLD: '04 Mazda RX-8
    SOLD: '97 Mitsu Pajero V6 GDi SWB

  2. #2
    Join Date
    Apr 2018
    Location
    Cape Town
    Posts
    595
    Thanked: 171

    Default Re: KB6 Upper Control Arms Ball Joint Spacer

    Kb6 doesn't have torsion bars but the rest of this information might help if you haven't read this thread already...

    https://www.4x4community.co.za/forum...353#post352353
    2017 Isuzu KB 300 4X4 Auto (current)
    2008 Isuzu KB 300 4X4 manual (current)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •