Series I Question to the boffs





Results 1 to 17 of 17

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jul 2011
    Location
    Virginia
    Age
    45
    Posts
    619
    Thanked: 936

    Default Question to the boffs

    My mate has this LR. Permanent 4x4 with no diff locks.

    Just used as a plaything on trails.

    So seeing that it has no diff locks, he is considering putting in manual lockers similar to what the old hilux SFA's have.

    Will this work? If so, how would he confirm which lockers to consider seeing that he did not build the vehicle himself and has no idea what diffs it has...

    Would it be possible to put the same type of manual lockers on the back diff?

    All advice would be appreciated.

  2. #2
    Join Date
    May 2009
    Location
    Witfield, Boksburg
    Age
    34
    Posts
    3,875
    Thanked: 64

    Default Re: Question to the boffs

    Permanent 4x4 with no difflock is standard.
    Should have centre difflock?
    It probably still has its factory diff then, so if you can figure out which year model it is that would help, even some pic's of the diff.
    You can remove the sideshaft as well, check how many splines it has.
    Chris

    "Avoiding danger is no safer in the long run than outright exposure. Life is either a daring adventure, or nothing" Helen Keller

    1996 Range Rover P38 4,6 HSE
    1977 LandRover Series III 109" Project

  3. #3
    Join Date
    Jul 2011
    Location
    Virginia
    Age
    45
    Posts
    619
    Thanked: 936

    Default Re: Question to the boffs

    Quote Originally Posted by Crips View Post
    Permanent 4x4 with no difflock is standard.
    Should have centre difflock?
    It probably still has its factory diff then, so if you can figure out which year model it is that would help, even some pic's of the diff.
    You can remove the sideshaft as well, check how many splines it has.
    Not sure about centre diff lock. But should it have one, that just distributes power equally to front and back diff?

    Does not lock the wheels thus independant wheel spin is still possible?

    Or am I missing something?

  4. #4
    Join Date
    May 2009
    Location
    Witfield, Boksburg
    Age
    34
    Posts
    3,875
    Thanked: 64

    Default Re: Question to the boffs

    Quote Originally Posted by Bacon View Post
    Not sure about centre diff lock. But should it have one, that just distributes power equally to front and back diff?

    Does not lock the wheels thus independant wheel spin is still possible?

    Or am I missing something?
    All depends what model it is and what transfercase.
    If it's a Series 3 like the door handels suggest, then it won't have centre difflock
    Chris

    "Avoiding danger is no safer in the long run than outright exposure. Life is either a daring adventure, or nothing" Helen Keller

    1996 Range Rover P38 4,6 HSE
    1977 LandRover Series III 109" Project

  5. #5
    Join Date
    Mar 2008
    Location
    De Wildt
    Age
    57
    Posts
    37,466
    Thanked: 13640

    Default Re: Question to the boffs

    Quote Originally Posted by Crips View Post
    If it's a Series 3 like the door handels suggest, then it won't have centre difflock
    Spot on: series 1, 2 & 3 was part time 4x4, not full time

    If it is a hybrid, who knows what is going on.
    2012 Jeep Sahara Unlimited 3.6 V6
    Percivamus

  6. #6
    Join Date
    Oct 2011
    Location
    Midrand
    Age
    48
    Posts
    2,925
    Thanked: 951

    Default Re: Question to the boffs

    if it is 4x4 it has a centre diff lock. If it is based on a 90 defender type it will have a centre diff lock to lock the front and rear propshafts together. If it based on a Series vehicle it will have part time 4x4 which still locks the centre diff (which is doesn't have since it is part time) so front and rear propshafts are locked together.

    if he wants to install aftermarket lockers on each axle, then one would need to know what axles he is running? It looks like a very modified plaything, so there is a good chance he is running salisbury diffs front and rear? Ashcrofts is probably the best place to start looking I would have thought?

    If it is some Dana variant then I guess detroit, or trutrac or similar also become options?

  7. #7
    Join Date
    Feb 2008
    Location
    Magalieskruin Pretoria
    Age
    49
    Posts
    1,122
    Thanked: 274

    Default Re: Question to the boffs

    Daar was ou Landies sonder die centre lock. As ek reg was hier rondom die middel 80's.

    Ashcrofts ATB's of lockers of ARB's sal werk in die diffs.
    Henk
    So understand
    Don't waste your time always searching for those wasted years
    Face up, make your stand
    And realize you're living in the golden years

  8. #8
    Join Date
    Jul 2011
    Location
    Virginia
    Age
    45
    Posts
    619
    Thanked: 936

    Default Re: Question to the boffs

    Right took a while but managed to get these pics.

    One of them has a serial number on (for what it's worth)

    He seems to think they might be salisbury diffs?

  9. #9
    Join Date
    Jul 2011
    Location
    Virginia
    Age
    45
    Posts
    619
    Thanked: 936

    Default Re: Question to the boffs

    Please ignore the second pic - accidently uploaded

  10. #10
    Join Date
    Feb 2010
    Location
    Centurion + Others
    Age
    61
    Posts
    2,809
    Thanked: 203

    Default Re: Question to the boffs

    Ive got a set of ARB lockers for 2 Rover diffs wit ALL connections switches compressor etc tc.

    evertyhing

    30k.

    It will make that thing a DEMON.
    Last edited by Capt Chaos; 2019/07/09 at 05:09 PM.
    Merit before Race - anything else IS Racism.
    Stay Calm, engage low-ratio, keep buggering on - a Landy Man
    Longevity isn't worth dying for,

  11. The Following User Says Thank You to Capt Chaos For This Useful Post:


  12. #11
    Join Date
    Mar 2015
    Location
    New Germany
    Age
    49
    Posts
    1,196
    Thanked: 496

    Default Re: Question to the boffs

    Looks like Rover long nose diffs if that is the case you can get aftermarket diff locks, and seeing as they rover diffs so no free wheel hubs it will most prob have a LT230 you need to check that it has the center diff lock mechanism installed, if it is a series TCase it will have a low high leaver and a 4 High push down lever
    1995 300TDi Defender with VGT Turbo (stolen by my son now )
    2002 Defender with LS1 MS3 ECU, 4L80e, LT230 1.222, Lockers and HD CW&P, 35" with 4" Lift
    2005 Defender TD5

  13. The Following User Says Thank You to clivemd For This Useful Post:


  14. #12
    Join Date
    Aug 2011
    Location
    Dowerglen
    Age
    54
    Posts
    2,193
    Thanked: 751

    Default Re: Question to the boffs

    Glad its just used as a plaything on trails, looks like a great fun Landy, but this steering link marvel must deserve its own award in engineering prowess....

    Either way, I guess it works, bumpsteer must be a shocker with those angles...
    Attached Images Attached Images  
    Every dog has its day, and those with broken tails have their weak-ends...

    1976 CJ-7, 400CI + Holley EFI, Tera-Low 3,15:1 twin stick, ARB's front & rear, oil leaks & plenty more....

    All my other petrol burners are boring....

  15. #13
    Join Date
    Jul 2011
    Location
    Virginia
    Age
    45
    Posts
    619
    Thanked: 936

    Default Re: Question to the boffs

    Quote Originally Posted by Marcochezzi View Post
    Glad its just used as a plaything on trails, looks like a great fun Landy, but this steering link marvel must deserve its own award in engineering prowess....

    Either way, I guess it works, bumpsteer must be a shocker with those angles...
    We were looking at that ourselves yesterday!
    The vehicle was purchased as is.

  16. #14
    Join Date
    Mar 2008
    Location
    De Wildt
    Age
    57
    Posts
    37,466
    Thanked: 13640

    Default Re: Question to the boffs

    Quote Originally Posted by clivemd View Post
    Looks like Rover long nose diffs if that is the case you can get aftermarket diff locks, and seeing as they rover diffs so no free wheel hubs it will most prob have a LT230 you need to check that it has the center diff lock mechanism installed, if it is a series TCase it will have a low high leaver and a 4 High push down lever
    precisely correct

    Lockers are available for the Rover axles.
    2012 Jeep Sahara Unlimited 3.6 V6
    Percivamus

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •