Search:

Thanks now I get it And understand the change over switch as well

thanks

Thanks for this really helped just the middle pic trying to understand wiring a bit better hard to follow wires when behind and I see you have two main sheathed cables coming in of 4 core each so...

Will be following this page as when get home will be doing mine


thanks

I am still not shore what battery’s to use with my Sunsynk 8kv was looking at the shoot 5.12Kwh as I think it is a 1C the same as the Sunsynk 5.1
are they the same unit but different branding
What...

Out of interest have you got a pic of your meter so can see what kind it is

Thanks Fluffy for comments
internet bad off shore so not easy to search internet about batteries so if you could make any recommendations will be apreshiated
thanks

Will find a way of paying for fuel to have fun 4x4ing with my son

some times it not the cost of fuel but repairs after

Good morning

so I have decided to start getting my solar system but doing it piece by piece as can’t afford to lay out one go
I have just bought the Sunsynk 8Kv inverter this month, next will...

What compressors are these ones using now days, are they the old Danfoss comp

The only wide ones I have seen and have 6 are blue water ones, but have not Seen them lately at shops only the normal ones

Very common happens to nearly all doors

Think if you search on the forum you will find a good few posts about Will not mention names on 300TDi that were not done properly and lot of money spent wasted and that was just on the 300TDi which...

The puma he has used the original gear lever but made it work for the auto he gets parts all lazer cut to work as a auto
my son Landy is the R380 tunnel and also using the set up all with hi low,...

Not good to here about what happened, my brother has done a good few Chev conversions and my son did his Landy Gen 4-5 engines all with 6 or 8 speed autos but it costs but end of day you have a...

Have you gone for a long drive few 100KM and then felt the temp of the safe bottom they do get hot in there just keep eye on that

Also when you set the injectors did you wined in the lash adjuster all way down on full lode lift then burn out one full turn and lock up

Have you also checked the FPR and what pressure you getting in fuel rail, does the turbo want to boost up and what bar boost are you getting, also disconnect the MAF plug as well
if changed injector...

and on most or all rebuilds change the plugs, but ppl take shortcuts

what has he done to come to conclusion it is the injectors

they say reconditioned by LandRover OEM supplier so maybe they are done properly

seen TD5 with over 650000km on clock and injectors still going strong and engine, end day all depends how looked...

Reconditioned TD5 injectors green top are about 980 pounds in UK that about 20k so not cheap

my LAndy will not be going up, but we taking 3 X 90’s that my brother and my son at Rocket88 did Chev Gen 5 conversions

Changing the head to a AMC and modified the fuel return line so will never crack with age as was getting hard now
piston tops look good bores still fine, block befor cleaning for head gasket

Next door the Ashburton race horse training center Ashburton Just out side PMB on Durban side

So this Sunday 29th May is Cars in the Park again after think 2 years

Have 3 Landys and the last few was about 1200 I think a few months ago,
unless licence was not renewed for the last year or two then I don’t see how he can ask that much,
you can also look into...

If the tip that means head off you could take chance and leave it in and hope it gets blown out over time or could go the opposite way and end up falling into top of piston coursing big problems, ...

Where about has it snapped

Double post

How much back lash have you got there is back lash in the front out put shaft

Are you talking about the back lash on the out put flange on the LT230 or on the pinion, you going to have to remove CV and then clean everything up in swivel hub, might as well do other side as...

Wonder what have in the 16” rim size if have 285 or 305 70 or75 X 16”

Wonder what sizes come in and prices

have Hangkooks on both Landies 33x12.5x15 and 35x12.5x15 and never had a problem with them off road or on, will probably use them again
only down side is the side wall is convex so can get damaged...

Is if making more black smoke then normal, if so could be a leak in a boost pipe