Search:

Hi All,

I am searching for a good second hand D2 V8 TC. No need for flex plate or bits.
Just needs to be serviceable.

Cheers,
EbenH.

If you are going to put that in a Tdi frame with Tdi mounts, notice my slick conversion for the oil filter mount :o

https://youtu.be/9LB1hN-fv2Q

559743

That's what you need, now call Turbo Direct in JHB and order one please.....


559744

That's the manifold, not so easy but PM me .....

559745

Sorry the bit about using the 300Tdi oil pump cover, you are referring to the entire back portion of the timing set-up?

So they are the same except for the holes where the diesel pump bolts to,...

I just finished my 2.8PS rebuild but I imported most of the parts from MD.

BUT........... are you in PTA / Midrand? PM me and I will give you the secret you seek or close ....

EbenH.

Difficult to judge the marks from the pics.

If you do decide to get a different set, certainly check clearances.
Mic the crank and see if it is exactly on spec or not.

EbenH.

As I mentioned, an average is aimed for across the set. What we have found is that different batches (see packing batch number) over the years have produced different sizes and even some...

The bearings supplied are assembled in the various locations, measurements taken and the crank is cut to give specified clearances for each bearing. Obviously some averages are aimed for but cutting...

Hey Pieter,

Did they produce the stud with the longer threads? I remember the last info it was too expensive to make us a batch :-[
I only built one motor with those short studs and drilling the...

Thanks for the vote dude!
I am still around, just gave up on the Rover V8 due to parts quality.

Hey Jay_B

Saw your bits on the shop floor at Miclin and Mike told me about your build.
If he gets a request like that he normally wants to do most of the rotating bits, that's why he asked you...

Correct, when a diesel engine runs at an stoichiometric ratio the smoke is extreme and the normal metallurgy used in vehicle engines will not handle that for long.

Diesel engines are ALWAYS run...

Hey Clive,

That is the seal for the 2.8 Power Stroke (International) which has the additional two holes in the rear cap.
I am looking for this seal locally if possible, my PS needs a new seal.
...

Hi Rogue1,

I used to keep track of 101's in SA, but have to admit I have not been diligent with that and in the last year or so I have moved 2 101's to new enthusiasts.

There are about 9 to 12...

Agreed that this type of work is painful on a new vehicle, but, if you intend keeping the vehicle for an extended period (+5y) and the work is done professionally you will be much happier that you...

How much pain can you handle?
This is on a P38 but applies to any vehicle with some thought. Have done this to a Tuna.

This type of install always makes room for at least two batteries with some...

Thank you for the info :) These are exactly the establishments I prefer to avoid. But I realise that is my choice and if I want solitude I have to pay a lot more, for less.

EbenH.

Very true, but prices have also increased substantially more than just inflation related and some places only quote in dollars.

I will support any forum that makes a point of offering a platform...

I am going to stick my head out a bit further here ......

I enjoy solitude and the real feel of the bush. I want to hear things I can't hear in the city. I want to see the sky as it unfolds into a...

I have been traveling for more than 15 years now. I always make sure I clean up after myself and do my best to leave any place I visit as I found it or better.

I hear both sides here ....... I for...

@captain caprivi

We had bookings at Mabalauta, Lesoda and Chipinda pools.
Depending on the time of year, I would not book anything, just go, stay two nights at Mabalauta and then drift north and...

You need patients and knowledge.

Not for the LR intolerant. IT's a HATE / LOVE thing .....

Keep your LC.

If you can't help yourself (I understand) rather get the 2000 onward models with...

My first visit to Gonarezhou was in 2005.

Here my vehicles side by side 12 years appart at the same spot, I miss my Classic ..... :'(

454560

Good day all,

A quick update....

@Martcassidy, nice meeting up with you a few times on the trip :)


We got through Pafuri on Thursday at about 11:00 and got "fined" 100m further for not...

We staying at Shingwedzi for the night of 5th July and doing the Limpopo on the 6th going on to Mabalauta for 6 and 7 July.
Want to join?

EbenH.

Hey ROlla,

If you follow me there I will let you know from the other side of the river bank if it was too deep ;D

What dates you doing?

See my previous post ......

Hi Elsabe,

We are planning to visit Gonarezhou with a booking at Mabalauta on 6/7 July and at Lesoda 8/9/10/11 July.

We would like to travel from Mabalauta via the interior of the park up to...

The 2000-2500rpm for 20min is a tad excessive but you need to avoid slow hard contact to ensure the two parts do not friction weld together.

I use Mo-Di on the cam lobes, start and run it between...

If you were close to Durban ....... I have about 50 of them from various top gasket kits installed.......

:-\

EbenH.

Hi GolfStok

440709

Hose 11 ties into the top of the thermostat ensuring circulation when cold. This tie in will be blocked off by the thermostat when it opens to allow flow through the...

Hey Golfstok,

About your V8......

That motor is brilliant, but has its issues. It does not like overheating so make sure it doesn't! MadMan, new hoses, bypass mod, and....
Replace the...

Yes that was the plan untill BMW came along.

It was actually used in Ford Ranger vehicles in South America from 2002 to 2006 IIRC.

It was upgraded WRT cooling in the block, oil galleries,...

Hmmm, you guys talk too much and do too little :p

Thanks GOBAT-ZN ;D


I will start a thread for the rebuild of this motor and all the compatibility it has with 300Tdi.

...

So I acquired this motor in bits in a crate from a forum member .....

438459 438460

438461

As expected the usual problem of buying a motor in pieces is missing parts ......

438462 438463