Disabling chimes




Page 1 of 4 1 2 3 4 LastLast
Results 1 to 20 of 75
  1. #1
    Join Date
    Sep 2006
    Location
    The Windy City
    Age
    45
    Posts
    13,590
    Thanked: 140

    Default Disabling chimes

    Jeep Wrangler JK - 2007 onwards
    Disabling seat belt chime.

    Here are the steps to deactivate the chime.

    1. Turn the ignition switch to the OFF position, and buckle the driver or front passenger seat belt.

    2. Turn the ignition key to the ACCESSORY/RUN position (engine does not need to be running), and wait for the Seat Belt Warning Light to turn off.

    3. Within 60 seconds of starting the vehicle, unbuckle and then re-buckle the driver or front passenger seat belt at least three times within 10 seconds, ending with the seat belt buckled.

    4. Turn the ignition key to the OFF position. A single chime will sound to signify that you have successfully completed the programming.

    DASHCAMS AVAILABLE IN THE ONLINE SHOP!
    R1995.00 including courier delivery and Micro32gig SD card.
    EFT and Credit Card payments available.
    Click here to purchase.

  2. #2
    Join Date
    Sep 2006
    Location
    The Windy City
    Age
    45
    Posts
    13,590
    Thanked: 140

    Default

    That's the one I did not really need, looking for the key in the ignition, door open, car not started, foot on the floor, lights are on, lights are off, start, stop etc, ie all the other chimes!
    Please post if you have the details. (For all the Jeep models)
    Thread sticky.

    DASHCAMS AVAILABLE IN THE ONLINE SHOP!
    R1995.00 including courier delivery and Micro32gig SD card.
    EFT and Credit Card payments available.
    Click here to purchase.

  3. #3
    Join Date
    Apr 2007
    Location
    Pretoria
    Age
    39
    Posts
    1,499
    Thanked: 1

    Default

    Just remember that the buckle status determines the airbag deployment functionality as well.

  4. #4
    Join Date
    Feb 2008
    Location
    Centurion
    Age
    39
    Posts
    12,096
    Thanked: 19

    Default

    A friend tried it on her 2007 Cherokee and it also worked.


    Overkill - isn't!

    uys@stofpad4x4.co.za
    www.stofpad4x4.co.za

    Why you need Stofpad4x4 Rock sliders

    Office: 012 654 7723 (sales)

  5. #5
    Join Date
    Dec 2006
    Location
    Cape Town, Otjiwarongo
    Age
    40
    Posts
    2,643
    Thanked: 0

    Default Grand cherokee

    Disclaimer: Who's responsable, you did it

    First remove covers around steering wheel. Note that the upper 2 screws need a T25 torque key.
    This image has been resized. Click this bar to view the full image. The original image is sized 750x600 and weights 72KB.


    Next on the left hand side you will see the actual switch that drives the ignition.
    This image has been resized. Click this bar to view the full image. The original image is sized 750x600 and weights 73KB.


    Here is the mechanical part. See the buzzer is hard wired to the ignition via a pressure switch. (just as I thought, Benhur right on the money ) Shaft pushes out when key is insetted. EDIT: Switch also wires to the computer
    This image has been resized. Click this bar to view the full image. The original image is sized 750x600 and weights 63KB.


    Next pic the actual switch notice 2 plugs. Small one for the buzzer, big one for the ignition wires. Rond bit the actual pressure switch.
    This image has been resized. Click this bar to view the full image. The original image is sized 750x600 and weights 58KB.


    Here is the plug for the buzzer halfway removed it has a blue and black wire.
    This image has been resized. Click this bar to view the full image. The original image is sized 750x600 and weights 83KB.

    Now with that done I think that the hachets, nail files and angle grinders can leave the buzzer alone.

    EDIT: NOTICE when removing the plug, two functions are lost in the overhead display (Remote linked to seats and easy exit seats) Only realised this when I had to set it for my mother (yes she also drives the Jeep). I don't use the functions. I'm 6'1" mom is 5' somewhere short

    Easy exit seat is totally lost as it cannot read when the key is removed. The memory linked to remote still functions, but it has to be set before the plug is removed.

    No codes show up when the plug is removed, strangely

    YOU HAVE BEEN WARNED.


    Hope this helps for other people that want to rip open the dash and smash the buzzer to smithereens.
    2002 Nissan Patrol 4.2Td. Body lift, 5cm OME lift 33inch Cooper SST, Burnco bumpers.

    Platkar:2002 BMW M5, 2002 M Coupe and 1985 635csi
    SWAMBO: BMW X5 3.0D
    Talk softly, carry a BIG stick
    Ex: Jeep Cherokee XJ 2.5Td

  6. #6
    Join Date
    Dec 2008
    Location
    CY ek sÍ!
    Age
    53
    Posts
    2,368
    Thanked: 0

    Default

    Biggles you forgot to tell Dirk the part where the warning also tells you.....DON'T TRY THIS AT HOME!!!!!!!!!!!
    It's a J e e p thing...........you would'nt understand!!
    Ek ry met stok-ou Jeeps, want dan dink almal ek's al lankal ryk!!
    Gee vir my 'n Coke......skoon Coke......met 'n dubbel Brannas in asseblief!!

  7. #7
    domino16261 Guest

    Question

    Quote Originally Posted by dirk View Post
    jeep wrangler jk - 2007 onwards
    disabling seat belt chime.

    Here are the steps to deactivate the chime.

    1. Turn the ignition switch to the off position, and buckle the driver or front passenger seat belt.

    2. Turn the ignition key to the accessory/run position (engine does not need to be running), and wait for the seat belt warning light to turn off.

    3. Within 60 seconds of starting the vehicle, unbuckle and then re-buckle the driver or front passenger seat belt at least three times within 10 seconds, ending with the seat belt buckled.

    4. Turn the ignition key to the off position. A single chime will sound to signify that you have successfully completed the programming.

    this worked on my 2005 cherokee, hows do you enable it again as this effects the airbg function as well/ or does it

  8. #8
    Join Date
    Sep 2006
    Location
    The Windy City
    Age
    45
    Posts
    13,590
    Thanked: 140

    Default

    Same procedure to enable it again. To the best of my knowledge it should not affect the airbag as it does not disable the seatbelt not buckled warning only the chime isnoff. My warning light stays on until I buckle it. Very happy now as I spend air of time in the car in our neighbourhood and often get out so it was becoming a pain.

  9. #9
    Join Date
    Nov 2008
    Location
    Rynfield
    Age
    38
    Posts
    43
    Thanked: 0

    Default

    Will this work on a 2006 WK Grand Cherokee?
    2009 Chevrolet Lumina SS 6.0L MT
    2006 BMW X5 3.0d Sports Pack
    2007 Ford F250 XL 4x4 LWB P/U

  10. #10
    Join Date
    Apr 2009
    Location
    Durban
    Age
    37
    Posts
    28
    Thanked: 0

    Default

    It seems the seat belt ding ding noise is disabled the same on many other makes of vehicles too!

    use or don't

  11. #11
    Join Date
    Oct 2007
    Location
    Jacobsdal
    Age
    42
    Posts
    44
    Thanked: 0

    Default thanX

    dit werk op my 2007 GC

    dankie tog

  12. #12
    Join Date
    Sep 2006
    Location
    The Windy City
    Age
    45
    Posts
    13,590
    Thanked: 140

    Default

    Nou soek ek nog die oplossing vir chime key in the ignition irritation!

    DASHCAMS AVAILABLE IN THE ONLINE SHOP!
    R1995.00 including courier delivery and Micro32gig SD card.
    EFT and Credit Card payments available.
    Click here to purchase.

  13. #13
    Join Date
    May 2009
    Location
    Cape Town
    Age
    30
    Posts
    152
    Thanked: 0

    Default

    This chime is giving me a heck of a lot of grey hairs....eish. Chrysler could figure out how damn annoying it is to hear this thing all day when the door is open?

  14. #14
    Join Date
    Sep 2008
    Location
    Randburg
    Age
    53
    Posts
    15
    Thanked: 0

    Default

    Quote Originally Posted by Chris_cross View Post
    This chime is giving me a heck of a lot of grey hairs....eish. Chrysler could figure out how damn annoying it is to hear this thing all day when the door is open?
    ja ASSEBLIEF is daar iemand wat 'n oplossing vir hierdie UITERS frustrerende aktiwiteit het ?

  15. #15
    Join Date
    Dec 2009
    Location
    Klerksdorp
    Age
    42
    Posts
    137
    Thanked: 0

    Default

    Great! Any luck on the 3.1 TD (WJ) ignition and seatbelt chime from someone?

  16. #16
    Join Date
    Sep 2006
    Location
    The Windy City
    Age
    45
    Posts
    13,590
    Thanked: 140

    Default

    Quote Originally Posted by CJ v H View Post
    Great! Any luck on the 3.1 TD (WJ) ignition and seatbelt chime from someone?
    Have you tried the procedure at the top?

    DASHCAMS AVAILABLE IN THE ONLINE SHOP!
    R1995.00 including courier delivery and Micro32gig SD card.
    EFT and Credit Card payments available.
    Click here to purchase.

  17. #17
    Join Date
    Oct 2009
    Location
    Maroeladal
    Age
    41
    Posts
    2,108
    Thanked: 0

    Default

    Quote Originally Posted by Dirk View Post
    Nou soek ek nog die oplossing vir chime key in the ignition irritation!
    Dirk,

    I got this from a guy in the States, haven't had the opportunity to try it out though:

    "wired a nintendo controller into the obdII port, up up down down left right left right start, no door chime."

    The obvious way to stop the chime is to disconnect or remove your doors , problem with the disconnect is that it also disconnects your remote central locking.

    Good luck finding a Nintendo controller.
    Rich

    VC - 4x4 Action Group

  18. #18
    Join Date
    Mar 2010
    Location
    Cape Town - RSA
    Age
    31
    Posts
    1,766
    Thanked: 2

    Default

    any new news on this?

    Would love to turn the annoyance off...

  19. #19
    Join Date
    Apr 2010
    Location
    Hilton
    Age
    55
    Posts
    52
    Thanked: 0

    Default

    Thanks, worked on my new, but used 2005 Jeep Grand Cherokee 3.0 CRD

  20. #20
    Join Date
    Jan 2010
    Location
    Cape Town
    Age
    51
    Posts
    13
    Thanked: 0

    Thumbs up Wow, it worked on my Cherokee 2.8 CRD 2003 model

    I`ve been meaning for ages to visit a dealership to ask how do i kill this irritating noise. i just read your fix for the chime, tried it AND IT WORKED!!! you guys are the best, thanks very much.

Page 1 of 4 1 2 3 4 LastLast

Similar Threads

  1. Chimes mud play time
    By NEON DEON in forum Calender & Events
    Replies: 2
    Last Post: 2011/01/27, 01:16 PM
  2. Good CHIMES & Offroad Recue 6 March 2010
    By JNel in forum 4x4 Trails / Routes / Clubs
    Replies: 10
    Last Post: 2010/03/08, 02:33 PM
  3. Camp chimes -xmas party gtg proposal
    By NEON DEON in forum 4x4 Trails / Routes / Clubs
    Replies: 33
    Last Post: 2009/11/15, 09:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Google Analytics Alternative